“If you need Chimney Repair in Hyderabad or installation by an expert professional with quality assurance call at -mobile no +91 9493651122”.
There Are Some Key Factors That Play A Major Role In This Process
1. Chimney Size
This is one of the important factors to consider when installing a chimney. A large-sized kitchen chimney sucks smoke from the hob even when it is slightly displaced from its position. But, if the size of your chimney matches the size of the hob, it is very important to place the chimney directly above it. to match it end to end.
If you have a small fireplace, match between the chimney and the hob.
2. Distance between Gas Stove And Chimney
Another important factor is the distance between the gas and stove in a kitchen chimney installation. The distance between the top of the hob and the chimney should be 26" to 30". It is also called kitchen chimney fitting or kitchen chimney installation height.
If the distance is less than 26" and the gas stove is on and there are no pots on the burner, the oil in the collectors can cause a fire in the chimney. And if the distance between the chimney and the hob is greater than 36", the chimney Can not remove all the heat and smoke.
Thus, the impurities make the kitchen cabinet oily and dirty. The distance from the hob determines the efficiency of the chimney.
3. Chimney Duct
In the case of ducted chimneys, ensure that the duct should not exceed 12 feet. The most preferred types of ducts are stainless steel and aluminum because of their strength and durability. Most chimneys come with PVC which can easily melt under suction when overheated.
Another thing is that the duct should not have too many turns. Bending makes it difficult for the smoke exhaust to reach. Therefore, a shorter pipe with fewer turns is more effective.
4. Cut-Out For Chimney Duct
The duct for the exit of the chimney is 6 inches wide and made circular to open the kitchen's exterior wall. This cut-out should be made on the outer wall of the kitchen at a height of 7 feet above the floor level.
In case the hole does not already exist, contact a chimney installer to have the correct hole drilled to install the chimney in the correct position.
Another approach might be to use the cut-out hole of an external exhaust fan to allow the duct to pass through. If you live in a rented house or apartment, it is better to go for the type of ductless chimney to avoid such situations.
Chimney General Installation Guide
Be sure of the installation type of chimney that is recycling or ducting.
Mark the standard distance between the top of the hob and the bottom of the chimney.
Mark holes for wall mounting brackets on the walls.
Fix the wall mounting bracket to the wall, make standard holes.
Install a fireplace on the wall.
Align the chimney horizontally by adjusting the wall lever screw.
Connect the power supply cord to the power supply point.
In ducting mode, after installing a chimney, perform ducting according to company-recommended guidelines.
In recycle mode, install the charcoal filter applied to the model.
Fix duct cover
0 comments:
Post a Comment